_code: 11582

1. Press SB3.
2. If the number that showed up on the display is higher than 50000:
   - Remove the orange cable.
   - Turn off the transformer.
If the number is 50000 or lower:
   - Remove the red cable.
   - Remove BATTERY_CABLE.

_code: 17632

1. Turn on MAIN BUTTON.
2. Pull out FUSE2.
3. If there is a FLAT WIRE TOP on the bomb pull out FUSE3. Otherwise pull out FUSE1.

_code: 19105

If the BOMB SERIAL NUMBER is type "B" or "C":
- set ROTARY SWITCH BROWN to 15.
- set ROTARY SWITCH GRAY to 3.
- Remove the red cable
- Pull out the antenna.
- Remove BUTTON_CELL_BATTERY.
Otherwise, if the BOMB SERIAL NUMBER is type "A" enter the sequence 12.

_ code: 20258

1. If the bomb has two or more COM_CAPACITORs, remove one.
2. Enter the sequence 10000.
3. Remove the yellow cable.
4. If the BRAND TRANSFORMATOR is "CONAN", cut the blue cable leading from a slot marked with two dots.
5. If there is a BATTERY_CABLE on the bomb pull out the BATTERY_AA. Otherwise set ROTARY SWITCH GRAY to 6.
6. Enter the sequence 2583.
7. Enter the sequence 36821.